LED 12V Power Supply
The 12V LED driver is a power supply that can be use for all of the Luxello LED numbers. The LED driver has a constant output of 12 VDC with an IP 67 rating. One single LED driver is sufficient to power up to five numbers of the 5" and 8" size.

LED 12V Power Supply

From: AUD24.00

12V LED Driver Transformer – IP44

1.0 A
  • SKU:LUX-12V-DR1

    AUD 36

12V LED Driver Transformer Wet Location – IP65

1.5 A, 18 Watt
  • SKU:LUX-12V-DR2

    AUD 48

12V LED Power Supply
Input: 110-265 VAC
Output: 12VDC
1.0 A, 50/60 Hz

12V LED Power Supply
Input: 110-265 VAC
Output: 12VDC
1.5 A – 18W, 50/60 Hz

How do you select the numbers?
On the product page you will find a drop down menu, select each digit you require and add it to the shopping cart one number at the time. The quantity gets adjusted in the shopping cart only.
 
What are spacers for?
You will require the spacers if you like to have the numbers projected of the wall by 1/2” inch. If you want to install the numbers flushed with the wall you do not require the spacers.
 
Electrical Requirements ?
The numbers require a minimum of 10 - 12 Volt AC or DC for optimum voltage. These are low voltage so you will require a transformer like a doorbell transformer or a 5 Watt LED Driver. A single power supply is enough to illuminated up to 6 numbers. The wires from each number all get connected to the same power supply they do not have any polarity. If you have a battery power pack that can output the required voltage requirements then you can use that as well.
LED driver options
 
Light Sensor ?
You can have the numbers go on automatically at dusk by installing a light sensor from Lutron on a switch. the switch will turn the power supply on and off which in turn feeds the power to the numbers.
 
How do I order a custom color ?
If you don’t see the specified combination of the metal house number and LED illumination you are looking for you can always special order the color and size you are requesting. Custom orders take in general about 2 - 3 weeks. To place a custom orders you will need to order the style and size that is available online please forward us the order confirmation number and we will make the changes to the order that you are requesting.
 
How do I order a backplate for my Numbers ?
A backplate panel for the numbers can be ordered together with any of the 5” numbers only. You must order the spacer kit when ordering the backplate. The panels will be shipped to you pre-assembled. The backplate panels come in four sizes and in 4 different colors. Once the order has been placed will you receive another email requesting confirmation the number sequence for the panel.
 
If you have any other questions please do let us know,
 
Thank you,